Solar Charge Controller (Normal Rating)

Solar Charge Controller is an Advanced Maximum Power Point Tracking battery charger for Photo-Voltaic (PV) systems. The controller features a smart tracking algorithm that maximizes the energy harvest from the PV and also provides load control to prevent over-discharge of the battery.

Solar Charge Controller (Normal Rating)

Solar charge controller is an advanced Maximum Power Point Tracking battery charger for Photo-Voltaic (PV) systems. The controller features a smart tracking algorithm that maximizes the energy harvest from the PV and also provides load control to prevent over-discharge of the battery.

There are a number of protections that the Solar Charge Controller ensures. Solar Charge Controller stops reverse current flow from battery to solar array, it provides load short circuit protection, it provides Battery/Panel reverse protection through DC fuse and Overload protection also. Solar charge controller is an advanced Maximum Power Point Tracking battery charger for Photo-Voltaic (PV) systems.

  • Better than PWM Solar Charge controllers
  • Battery Health For Longer Life
  • Extensive Electronic Protections
  • Highly Reliable
  • Small Siz

Better than PWM Solar Charge controllers

The UTL make rMPPT Charge Controllers are 30 % More efficient than normal charge controllers, as they employ Razor sharp Maximum Power Point Technology. The voltage at different point of times from Morning to evening varies and to tap it different input voltage selection for DC output source are required. MPPT does it accurately, so that you achieve maximum out of your investment in Solar panels. We employ both Perturb and Observe along with Incremental Conductance methods in parallel. We call it Razor sharp because it switches the point of solar output voltage very sharply. Now, you need to use only 70% of needed Solar Panels, thus saving 30% of investments, which makes the UTL rMPPT Charge Controller virtually absolutely Free.

Battery Health For Longer Life

The Solar Charge Controller feeds the battery installed to it a constant boost charging current until its voltage reaches 14.2V and the float current (which is very close to zero) then maintains this voltage above 13V. Thus reducing the float current ( flowing for the longest period during the entire process) to zero, ultimately resulting in much enhanced battery life keeping it fully charged simultaneously.

Extensive Electronic Protections

There are a number of protections that the UTL Solar Charge Controller ensures. Solar Charge Controller stops reverse current flow from battery to solar array, it provides load short circuit protection, it provides Battery/Panel reverse protection through DC fuse and Overload protection also.

Highly Reliable

Solar Charge Controller is very highly reliable. This is due to the various protections, as discussed above, included in it.

Small Size

Solar Charge Controller is very small in size and thus it also reduces the overall size of the system.

MPPT SOLAR CHARGER CONTROLLER
Electrical Model MSCC 12 MSCC 24
Technology MPPT / PWM
Precise Control Micro Controller Based
Switching Devices MOSFET
Peak Efficiency 92%
Features Dusk to dawn / Parallel Load
Solar (SPV)- Recommended Panel 36-Cells 36-Cells
SPVmax (Voc) 22.5V 45V
Operating Range 17V-21.5V 34C-44V
Low Cut 12V±1V 24V±1V
Low Cut Recovery 17V±1V 34V±1V
Battery Nominal Voltage 12V 24V
Bulk/ Boost Voltage 14.5V±1V 29V±1V
Float/ Trickel Voltage 13.5V±1V 27V±1V
Equalize Voltage 15V±1V 30V±1V
Equalize Period 28 Days 28 Days
Available Current Range 10A, 20A 10A
Battery low alarm ≤ 11.2V±1V ≤ 22.4V±1V
Load Battery low load disconnect 10.8V±1V 21.6V±1V
Battery low load reconnect 12.6V±1V 25.2V±1V
Battery high load disconnect 15.5V±1V 31V±1V
Battery high load reconnect 13.5V±1V 27V±1V
Dusk to Dawn (Optional) DC  Load ON ≤ 0.9V of SPV ≤ 1.8V of SPV
DC  Load OFF ≤ 1.9V of SPV ≤ 3.8V of SPV
Protections Over Charginh Current Provided
Over Charging Voltage Provided
SPV Reverse Polarity Provided
Reverse Current Flow Provided
Lightuing/ Suger Protection Provided
Indications and Alarms LED Parameters SPV ON GREEN
Charger On GREEN
Battery Full GREEN
Battery Low RED
Over Load RED
Battery Medium YELLOW
Buzzer / Alarm Batt. High load disconnect
Batt. Low load disconnect
Overload
Overload Conditions % of Load on Charger 100% Continuous
101% – 120% 1min.OFF / 10 min.ON
121% to 150% 1min.OFF / 30 min.ON
151% to 200% 1min.OFF / 2 min.ON
≤  200% 1min.OFF / 0.5 min.ON
Physical Cabinet Type Metllic
Cabinet Diamention (L x W x H) (mm) 130 X 130 X 75(mm)
Weight 0.55Kg
Cabinet Colour Gray
Placement Horizontal
Indoor
Environmental Operating Temperature 0°C to 50°C
Storage Temperature -10°C to 70°C
Max. Relative Humidity (Non) 5% to 95%
Ingress Protection IP-20